(Concrete Admixtures)ABAPLAST WR-4610

ABAPLAST WR-4610
PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE
ABAPLAST WR-4610 is high range water-reducer and super plasticizing admixture based on modified polycarboxylic (PC) polymers. It acts efficiently to give controlled workability about180 minutes.
It meets the requirements of the following standards:
ASTM C1017/C1017 M, ASTM C494/C494 M TYPE F
EN 934-2
ISIRI 2930
ADVANTAGES
• Reduces cement content in concrete
• Creating fluidity of concrete before setting (increased concrete workability)
• Design of concrete mixes with water-cement ratios in the range of 0.3 to 0.4
• No needs for vibrators
• Improves concrete consistency
• Improves pumpability of concrete
• It can be used with all types of Portland cement including Sulphate Resisting.
• Use simultaneously with silica fume, fly ash and other pozzolanic materials
• Enables production and transportation of concrete over long distances
• Prevents cold joint
• Increases the compressive strength of concrete
• Allows reduction of curing cycles - i.e. time or temperature.
APPLICATION
• Hot weather concreting
• Exposed concretes
• Mass concrete
• Concreting in thin and congested steel reinforcement sections
• Produces High Performance Concrete (HPC)
• Produces High Strength Concrete (HSC)
• Produces Self-Consolidating Concrete (SCC)
• Produces Water Resistant Concrete (WRC)
• Produces Preplaced Aggregate Concrete (PAC)
DOSAGE
The optimum dosage of ABAPLAST WR-4610 can be determined by trials in the site. Depending on concrete mix design (sizes and types of aggregates, cement content, water/cement ratio, ambient temperature and concreting conditions), a dosage of between 0.3 and 0.9 percent by weight of cement or cementitious material is recommended.
For use with other range of dosage, contact ABADGARAN Technical Services Department.
DIRECTION OF USE
1-ABAPLAST WR-4610 could be added to a part of concrete mixing water then added to the concrete mix